Current student projects underway across the partnership
Improving Ultrasonic Imaging Using Machine Learning
Oliver Coates supervised by Charles Macleod & Katy Tant at Strathclyde
Explainable AI in Ultrasonic NDT
Yuyang Liu supervised by Anthony Croxford & Paul Wilcox at Bristol
Visual Vibrometry for use in NDE
Lucy Dougill supervised by Anthony Croxford & Paul Wilcox at Bristol
Early defect detection and material characterisation using non-linear ultrasound
Zubeir Saib supervised by Bruce Drinkwater & Anthony Croxford at Bristol
Low-frequency Vibration Inspection of Sandwich Composites
Joshua Aigbotsua supervised by Bruce Drinkwater & Mahdi Azarpeyvand at Bristol
Coded Excitation of Ultrasound for Improved Signal Acquisition in Pipeline Inspection Robots
Connor Challinor supervised by Fred Cegla at Imperial
Ultrasonic Inspection for Complex Geometry
Matt Chandler supervised by Anthony Croxford at Bristol
Robotic Inspection of Complex Welds
Adam Gilmour supervised by Gordon Dobbie at Strathclyde
Ultrasonic Characterisation of Micro-Texture Regions in Titanium Alloys
Dave Harra supervised by Katy Tant at Strathclyde
Measurement Interpretation for Guided Wave Testing
Mikolaj Mroszczak supervised by Peter Huthwaite at Imperial
In-line Eddy-Current Testing (ECT) of Carbon Fibre Reinforced Polymers (CFRP)
Meirbek Mussatayev supervised by Rob Hughes & Paul Wilcox at Bristol
Advanced NDE in Future Oil and Gas Inspection
Ewan Nicolson supervised by Charles MacLeod at Strathclyde
Material Characterization using Ultrasonic Testing
Melody Png supervised by Bo Lan & Mike Lowe at Imperial
Novel Ultrasonic Coupling Materials
Qin Feng supervised by Bruce Drinkwater at Bristol
Clamp-on Ultrasonics Guided Wave Flow Measurement in Thin-Walled Pipes
Luke Smith supervised by Steve Dixon at Warwick
Ultrasound Driven, In-Process Fusion Welding Inspection & Control
Nina Sweeney supervised by Charles MacLeod at Strathclyde
Metallic material grain structure characterization using ultrasonic arrays
Weixin Wang supervised by Jie Zhang & Paul Wilcox at Bristol
Autonomous NDT with Inductively Coupled Transducer System (ICTS)
Yangjie Chen supervised by Anthony Croxford at Bristol
Characterisation of grain microstructures in metals using ultrasound
Andre Lello supervised by Bo Lan at Imperial
Liquid Crystal Sensors for Ultrasound Detection
Martha Turvey supervised by Rachel Edwards at Warwick
Laser induced 2D phased array for composite material inspection
Lily Tu supervised by Paul Wilcox & Alberto Gambaruto at Bristol
Robotic pipe inspection with ultrasonic sensor arrays
Alex Towlson supervised by Bruce Drinkwater & Anthony Croxford at Bristol
Machine Learning for NDE Inspection
Shaun McKnight supervised by Gareth Pierce at Strathclyde
Smart Metallurgy
Peng Jin supervised by Richard Smith & Matt Clark at Nottingham
Automated analysis approaches for Structural Health Monitoring on aerospace primary structure with ultrasonic and electromagnetic sensor arrays
Will Punter supervised by Rob Hughes & Bruce Drinkwater at Bristol
Defect Characterisation Using Ultrasound Arrays
James Junlei An supervised by Jie Zhang, Nicolas Larossa & Sasha Velichko at Bristol
Super-resolution 3D ultrasound tomography for material microstructure characterisation
Zhenshan Wang supervised by Sasha Velichko & Jie Zhang at Bristol
Collaborative and hybrid robotic techniques for NDT measurements
Matthew Shields supervised by Gareth Pierce & Randika Vithanage at Strathclyde
Non-destructive evaluation of residual stress using the collaborative robot
Brandon Mills supervised by Yashar Javadi at Strathclyde